Club 6500c

N° d’article CLUB 6500C
  • Select Color
Product Actions
Add to cart options
99,99 €99.99 par système

En stock. Temps de livraison estimé à 2-4 jours ouvrés

Caractéristiques Générales

Power Handling 60W RMS, 180W peak
Sensitivity (@ 2.83V) 92dB
Impedance (ohms) 3

Audio Specifications

Frequency Response 55Hz – 20kHz
  • 1 paire de haut-parleurs graves
  • 1 paire de haut-parleurs aigus
  • 1 paire de filtres
  • 1 paire d'accessoires de montage saillant pour tweeter
  • 1 paire d'accessoires de montage affleurant pour tweeter
  • 1 paire d'écrous de tweeter
  • 1 paire de rondelles plates de tweeter
  • 1 paire de bagues d'adaptation de woofer
  • 1 paire de grilles de woofer
  • 6 vis de fixation de tweeter
  • 8 petites vis de fixation de woofer
  • 8 grandes vis de fixation de woofer
  • 8 vis de fixation de filtre
  • 8 attaches rapides
  • Bande de mousse de montage
  • Mode d'emploi
Les haut-parleurs coaxiaux et les kits apportent le son JBL légendaire à plus de véhicules. Leur compacité impliqué qu'ils se monteront dans la plupart des voitures et camions sur la route, tandis que leur sensibilité élevée fournit des performances exceptionnelles, même quand ils sont alimentés par les systèmes stéréo d'origine. Les cônes en polypropylène renforcés de type Plus One™ produisent des graves percutants et offrent des performances de longue durée. Les tweeters à dôme PEI équilibré diffusent des aigus fluides. Disponibles dans une gamme de tailles standard— coaxiaux 8,7cm, 10cm, 13cm, 16,5cm, 10x15cm, 15x20cm, 3 voies 23x15cm et kits éclatés 13cm, 16,5cm et 23x15cm —ils représentent une mise à niveau parfaite des haut-parleurs d'origine.

Manuels & Télécharger

Les derniers modes d’emploi, des guides de démarrage rapide et autres documents.

Search Result For ""

Club 6500c est évalué 4.5 de 5 de 2.
Rated 4 de 5 de par Great value for the price! I installed these a week ago. The previous speakers I had, cost more than I paid for my JBL Club 6500 speakers. At the time (10 years ago) they were high quality premium speakers w larger magnets. Obviously technology has made improvements to the size and performance of speakers and I couldn't be happier with the overall quality of sound and price that I paid for my JBL speakers.
Date de publication: 2017-12-13
Rated 5 de 5 de par Amazing Sound! I bought this and it arrived just yesterday, I brought it to the shop and had a friend help me install it. Only took us about 2 hours for everything and it went great without any troubles. My only issue that has nothing related to the speakers is I am still using my factory stereo which doesn't give enough power to the speakers. I am planning on getting an amp to provide the power needed. I also bought this item with the club 6520.
Date de publication: 2018-11-22
  • y_2019, m_1, d_17, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_fr_FR, sid_club6500c-, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_harmanaudio

what amp should I get for this system?

Posée par: caiden
You might find the answer to your question in our Product Support FAQ and knowledge base sections: https://www.harmanaudio.com/support-knowledgebase.html.To submit a support case, please fill out he Contact Us form at the same location.
Répondue par: Harman Stefano
Date de publication: 2018-12-13

what awg wire is needed to connect it

Posée par: groeney
You can use any cable from 14-16 awg wires to connect the Club 6500c.
Répondue par: Mario at Customer service
Date de publication: 2018-11-23

Does the Club 6500c work for a factory stereo?

Posée par: groeney
The nominal impedance of the Club 6500C is 3 ohms. It should work with factory head-units.
Répondue par: Jemson G
Date de publication: 2018-11-22

hallo. ik heb de club 6500c in mijn auto . word de kwaliteit van de set beter als je er een versterker tussen zet?

Posée par: Stijn1996
Hi Stijn, Dat is heel afhankelijk van de autoradio welke je in de auto hebt. Helaas kunnen wij je hierin niet adviseren, en wil ik je aanraden om dit bij een inbouw-specialist na te vragen
Répondue par: Kay Harman
Date de publication: 2018-11-05

does this set come with an amp

Posée par: groeney
No. Amps are sold separately. You can check them out at https://www.jbl.com/car-amplifiers/
Répondue par: Mario at Customer service
Date de publication: 2018-11-02

Hi I am currently running a set of jbl 6500c club in van I am now looking to purchase a jbl stage 810 sub and locate this in the van to, the question I need help with is which would be a good amp to run these to get the best from them. regards Mike

Posée par: t5mike
Hi, and thank you for supporting JBL! I recommend JBL Club 4505 for your setup. You can bridge the four main channels to have 2x130 W into 4 Ohms, and you will have the sub channel with 320 W to the 4 Ohm 810 woofer. That will make an impressive system.
Répondue par: Bo Harman
Date de publication: 2018-10-12

Hey JBL, could you tell me the impedance of the woofer and tweeter independently please? I am looking for replacements for my Harman Kardon Mini which has its own dedicated outputs so won't be using the Cross over supplied. Kind regards,

Posée par: Wod7
Hi, and thank you for your interest in JBL! I am sorry, but we do not have individual specs for combination sets. And also please note that the crossover network is made for this specific purpose, with these two exact drive units. We do not have specs for crossover frequency and steepness of the flanks either, so you are totally on your own. All warranty will also be void if you do not use the standard crossovers. The only way I can see you can do this is to use a simple multi-instrument to measure DC resistance, then use this as a coarse guide for the impedance. If you read 3.5 Ohms, at least you will know that this is not an 8-Ohm unit. I know that this measurement is not completely correct, and if you want, you can of course set up a real impedance-measuring circuit. You can find them on the net. Also, you can run a sinus sweep through the crossover with the drive units connected, and note the levels on paper that you can read off a sound level meter, freely available as an app for your phone. I hope this helps.
Répondue par: Bo Harman
Date de publication: 2018-09-14

do i need to buy a wiring kit separat for this system or does all the wires neede for instalation come with the box

Posée par: Andr34s
Hi, and thank you for your interest in JBL! In the box you will find wires for the tweeters, to connect to the crossover networks. Wires to connect the head unit to the crossover, and from the crossover to the woofers, must be purchased separately, or are already in the car (head unit to crossover). This is because the lengths needed vary a lot from installation to installation. I hope this helps.
Répondue par: Bo Harman
Date de publication: 2018-10-06
  • y_2019, m_1, d_17, h_1CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_28
  • loc_fr_FR, sid_club6500c-, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harmanaudio